NSN 5920-00-054-2192 · NIIN 000542192 · FSC 5920
NO DASHES 5920000542192
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.875 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.200 AND INCHES MAXIMUM 1.205 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.070 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.105 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.156 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| AEVB | MOUNTING HOLE STYLE | |
| AFXH | INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES NOMINAL 1.250 |
| AGUK | ACCOMMODATED FERRULE DIAMETER | INCHES NOMINAL 0.250 |
| AGUN | RESISTOR RATING | KILOHMS 1.2 |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 46.0 TO 60.0 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES NOMINAL 0.813 |
| AGVA | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 0.750 |
| AGVB | CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 0.875 |
| AGVF | BUSHING HOLE DIAMETER | INCHES NOMINAL 0.875 |
| AGVM | CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | INCHES NOMINAL 0.437 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 30.0 |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ELEC | VOLTAGE IN VOLTS | 60.0 |
| MATT | MATERIAL | BODY PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS AND PLASTIC POLYCAPROLACTAM AND GLASS AND PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS |
| MATT | MATERIAL | CONTACT COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---14, TYE SDG |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 19 |
Supersedes
This item replaces cancelled NIIN 001725102. An older drawing citing one of those numbers resolves here.