NSN 5920-00-995-0431 · NIIN 009950431 · FSC 5920
NO DASHES 5920009950431
In Stock
FUSEHOLDER,EXTRACTOR POST
Fuses, Arrestors, Absorbers, and Protectors
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGUE | FUSE ACCOMMODATION QUANTITY | 1 |
| AGUJ | ACCOMMODATED FUSE LENGTH | INCHES MINIMUM 0.498 AND INCHES MAXIMUM 0.538 |
| AGUN | RESISTOR RATING | KILOHMS 2.0 |
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| ABKH | BUSHING DIAMETER | INCHES NOMINAL 0.625 |
| MATT | MATERIAL | BODY PLASTIC DIALLYL PHTHALATE AND GLASS |
| AGVF | BUSHING HOLE DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| SFTT | SURFACE TREATMENT | TERMINAL SOLDER AND TIN |
| ADZC | ENVIRONMENTAL PROTECTION | DRIPPROOF |
| AEVB | MOUNTING HOLE STYLE | |
| AFXH | INTERRUPTION INDICATOR METHOD | NEON LAMP |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.132 AND INCHES MAXIMUM 1.179 |
| CQJL | CURRENT CARRYING RATING IN AMPS | 5.0 |
| AGUP | INDICATING LAMP VOLTAGE RANGE IN VOLTS | 81.0 TO 90.0 |
| AGUT | LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | INCHES MINIMUM 0.530 AND INCHES MAXIMUM 0.570 |
| AGUU | BUSHING THREAD LENGTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| SFTT | SURFACE TREATMENT | CONTACT SILVER |
| ELEC | VOLTAGE IN VOLTS | 125.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CONTACT FED SPEC SINGLE TREATMENT RESPONSE QQ-S-365 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-F-19207 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.760 AND INCHES MAXIMUM 0.800 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY MIL SPEC SINGLE MATERIAL RESPONSE -IL---19833, TYE GDI-30F |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER CONTACT SURFACES |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-F-19207 TO 28 |
| AGVH | FLATTED SIDE BUSHING HOLE LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.575 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| CSNM | FUSE TERMINAL TYPE ACCOMMODATED | PIN |