NSN 5915-00-814-9334 · NIIN 008149334 · FSC 5915
NO DASHES 5915008149334
In Stock
FILTER,BAND PASS
Filters and Networks
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 2.430 AND INCHES MAXIMUM 2.490 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 3.485 AND INCHES MAXIMUM 3.515 |
| ADAT | BODY WIDTH | INCHES MINIMUM 2.485 AND INCHES MAXIMUM 2.515 |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED KILOHERTZ BLANK 98.250 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | SECOND FUNCTION TAB, SOLDER LUG OUTPUT 2 |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED KILOHERTZ BLANK 96.250 AND KILOHERTZ BLANK 96.750 AND KILOHERTZ BLANK 99.750 AND KILOHERTZ BLANK 100.250 |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | LOCATION NOT OTHERWISE SPECIFIED BLANK 6.0 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 1.995 AND INCHES MAXIMUM 2.005 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 0.0 TO 50.0 |
| AFSV | AVERAGE LIFE RATING IN HOURS | 10000.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 08440-200-0025 |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED OHMS BLANK 750.0 |
| AHAS | LOAD IMPEDANCE PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED OHMS BLANK 750.0 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | LOCATION NOT OTHERWISE SPECIFIED THREADED STUD(S) 4 |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | FIRST FUNCTION TAB, SOLDER LUG INPUT 2 |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | FIRST FUNCTION MINIMUM BLANK 70.0 AND MAXIMUM BLANK 6.0 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 2.995 AND INCHES MAXIMUM 3.005 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.138 |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | LOCATION NOT OTHERWISE SPECIFIED KILOHERTZ BLANK 96.750 AND KILOHERTZ BLANK 99.750 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 1.985 AND INCHES MAXIMUM 2.015 |