NSN 6105-01-248-0828 · NIIN 012480828 · FSC 6105
NO DASHES 6105012480828
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 8.438 |
| AAJU | OVERALL LENGTH | INCHES 13.690 |
| AAJV | OVERALL WIDTH | INCHES 7.875 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG AND OPEN |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BYDT | BEARING TYPE | ANNULAR BALL |
| CNMM | FRAME SIZE DESIGNATION | 184T |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 5.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.250 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.219 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.500 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW FULL LOAD 850.0 AND HIGH FULL LOAD 1725.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 460.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | THIS ITEM IS A M1208T(CAGE 05472)WITH THE JUNCTION BOX REMOVED |
| FREQ | FREQUENCY IN HERTZ | 50.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |