NSN 3110-00-184-9113 · NIIN 001849113 · FSC 3110
NO DASHES 3110001849113
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | BALL STEEL CORROSION RESISTING |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.1875 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 0.5650 |
| FEAT | SPECIAL FEATURES | PACK BEARING 10 PERCENT FULL OF SPECIFIED GREASE ALSO BALL CONTACT ANGLE 14 DEG MIN TO 25 DEG MAX |
| LBMA | LUBRICATION MATERIAL | GREASE OR OIL |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.1562 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0420 |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES NOMINAL 0.5000 |
| AGYC | CALIBRATION DESIGNATOR | C44 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MOLDED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0008 AND INCHES MAXIMUM RADIAL 0.0024 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| MATT | MATERIAL | INNER RING STEEL CORROSION RESISTING |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC 1ST MATERIAL RESPONSE -IL-G-81322 OR MFR REF 2ND MATERIAL RESPONSE XRL743A,FSC- 77988 |
| MATT | MATERIAL | OUTER RING STEEL CORROSION RESISTING |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC |
| STYL | STYLE DESIGNATOR |