NSN 3130-01-013-9817 · NIIN 010139817 · FSC 3130
NO DASHES 3130010139817
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXV | BORE DIAMETER | INCHES NOMINAL 3.0000 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.2500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 6.9375 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 4.8750 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 13.0000 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 3.5000 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 13.0000 |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 3.5000 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| FEAT | SPECIAL FEATURES | BASE SUPPLIED WITHOUT MOUNTING HOLES |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BEARING STEEL COMP E52100 |
| MATT | MATERIAL | SEAL STEEL |
| MATT | MATERIAL | HOUSING STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BEARING ASSN STD SINGLE MATERIAL RESPONSE SAE |
Supersedes
This item replaces cancelled NIIN 010228796. An older drawing citing one of those numbers resolves here.