NSN 3130-01-297-2836 · NIIN 012972836 · FSC 3130
NO DASHES 3130012972836
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.3750 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.8750 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 3.9375 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 2.0000 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 12.6250 AND INCHES MAXIMUM 14.5000 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES NOMINAL 2.7500 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 9.6250 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 6.5000 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 16.5000 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 4.7500 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 4.9375 |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE AND BOLT |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE OR OIL |
| MATT | MATERIAL | BEARING STEEL COMP E52100 |
| MATT | MATERIAL | HOUSING STEEL |
| MATT | MATERIAL | SEAL STEEL |
| STYL | STYLE DESIGNATOR |