NSN 5905-01-224-9555 · NIIN 012249555 · FSC 5905
NO DASHES 5905012249555
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Application: F404-GEDCN
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 24.000 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.375 AND INCHES MAXIMUM 1.625 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.125 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.437 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 2.000 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AGAV | END ITEM IDENTIFICATION | F404-GEDCN |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CSCF | TERMINAL TYPE | WIRE LEAD |
| PKWT | UNPACKAGED UNIT WEIGHT | GRAMS 0.34 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07482-J165 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SOURCE CONTROL 07482-J165 |