ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / NSN 3770-01-616-2033
NSN 3770-01-616-2033  ·  NIIN 016162033  ·  FSC 3770
NO DASHES 3770016162033
In Stock

COMB,DOG

Saddlery, Harness, Whips, and Related Animal Furnishings

Technical characteristics

5 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYCOMB, GROOMING, MILITARY WORKING DOG
FEATSPECIAL FEATURESTHE TEETH SHALL BE FABRICATED OF STAINLESS STEEL OR OF OTHER METAL TREATED FOR RESISTANCE TO CORROSION. THE BACK AND HANDLE OF THE COMB MAY BE FABRICATED OF METAL OR ORGANIC MATERIAL. ANY METAL USED SHALL BE TREATED TO RESIST CORROSION. ANY ORGANIC MATERIAL USED SHALL BE NON-ABSORBENT AND WASHABLE IN HOT, SOAPY WATER. THE MATERIAL SHALL NOT BE BIODEGRADABLE AND SHALL NOT BE DAMAGED BY STORAGE AT HIGH AND LOW TEMPERATURES. THE COLOR IS OPTIONAL.
SUPPSUPPLEMENTARY FEATURESSTRAIGHT, HEMISPHERICAL TEETH AND ROUND PLASTIC HANDLE
TEXTGENERAL CHARACTERISTICS ITEM DESCRIPTIONTHE COMB SHALL BE DESIGNED AND FABRICATED FOR SEPARATION, ALIGNMENT, AND SMOOTHING OF THE HAIRS ON A DOG'S COAT, PARTICULARLY AFTER THE DOG HAS BEEN GIVEN A BATH. THE COMB SHALL BE ROUND IN CROSS-SECTION, AND THE TIPS OF THE TEETH SHALL BE ROUNDED TO MINIMIZE IRRITATION OF THE DOG'S SKIN. THE TEETH SHALL EXTEND STRAIGHT OUT FROM THE BACK OF THE COMB, PERPENDICULAR TO THE HANDLE, AND SHALL BE EVENLY SPACED. THE COMB SHALL HAVE BETWEEN 9 AND 12 TEETH PER INCH. THE TOOTH SECTION OF THE COMB SHALL BE AT LEAST 3 INCHES IN LENGTH, AND THE HANDLE SHALL BE AT LEAST 4 INCHES LONG. THE TEETH SHALL BE OF EQUAL LENGTH AND SHALL EXTEND FROM THE BACK OF THE COMB FOR A UNIFORM DISTANCE BETWEEN 0.75 AND 1.0 INCH.
ZZZKSPECIFICATION/STANDARD DATAPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 05047-AS-E Y14.200 AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 05047-AS-E Y14.24 AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 05047-AS-E Y14.34- AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 05047-AS-E Y14.35-