NSN 5315-01-019-6909 · NIIN 010196909 · FSC 5315
NO DASHES 5315010196909
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.238 AND INCHES MAXIMUM 0.240 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.385 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1882 AND INCHES MAXIMUM 0.1885 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.620 AND INCHES MAXIMUM 0.630 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.172 AND INCHES MAXIMUM 0.175 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.018 AND INCHES MAXIMUM 0.020 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.010 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 |
| CRDY | FIRST END LOCATION | SHANK END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | SHOULDER END MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE GA3023,FSC- 01714 |
| STYL | STYLE DESIGNATOR |