NSN 5962-01-087-8519 · NIIN 010878519 · FSC 5962
NO DASHES 5962010878519
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Application: TELETYPEWRITER SET,TYPE AN/UGC-75( )(V)
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.553 AND INCHES MAXIMUM 1.573 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 1.050 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.352 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | WATTS 30.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| AGAV | END ITEM IDENTIFICATION | TELETYPEWRITER SET,TYPE AN/UGC-75( )(V) |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 1 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | REGULATOR, VOLTAGE 1 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 20.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 80063-S--A-915925 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
Supersedes
This item replaces cancelled NIINs 010110384 · 010472090 · 012035848 · 012069462 · 012566759. An older drawing citing one of those numbers resolves here.