NSN 5320-00-395-6446 · NIIN 003956446 · FSC 5320
NO DASHES 5320003956446
In Stock
PIN-RIVET
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6049 |
| AAJD | THREAD CLASS | 3A |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2797 AND INCHES MAXIMUM 0.2807 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.502 AND INCHES MAXIMUM 0.507 |
| ABAJ | LUBRICATION | CETYL ALCOHOL |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 0.630 |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.010 AND INCHES MAXIMUM 1.030 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.095 AND INCHES MAXIMUM 0.097 |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Supersedes
This item replaces cancelled NIIN 001602460. An older drawing citing one of those numbers resolves here.