NSN 5306-00-974-6595 · NIIN 009746595 · FSC 5306
NO DASHES 5306009746595
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 26512-GB511B |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3108 AND INCHES MAXIMUM 0.3117 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.635 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.351 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.976 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| MATT | MATERIAL | OVERALL STEEL OR STEEL COMP H11 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE NAS 672 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.177 AND INCHES MAXIMUM 0.197 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 26512-GB511B5 |