NSN 5306-01-349-4183 · NIIN 013494183 · FSC 5306
NO DASHES 5306013494183
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.828 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.375 AND INCHES MAXIMUM 2.405 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.567 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.616 AND INCHES MAXIMUM 0.627 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.928 AND INCHES MAXIMUM 0.938 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.123 AND INCHES MAXIMUM 0.143 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.5610 AND INCHES MAXIMUM 0.5615 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.562 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.552 AND INCHES MAXIMUM 1.572 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |