NSN 3020-00-517-0618 · NIIN 005170618 · FSC 3020
NO DASHES 3020005170618
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.031 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.145 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.688 |
| FEAT | SPECIAL FEATURES | LETTER I STAMPED ON 1ST END 2 DEG FROM GROOVE CENTER LINE CW,GROOVE 0.250 IN. MIN 0.253 IN. MAX W,0.171 IN. MIN 0.181 IN. MAX DEEP ON FACE OF HUB |
| MATT | MATERIAL | OVERALL STEEL COMP 1213 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI C1113 |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.000 |
| CWRS | BORE NOMINAL DIAMETER | COUNTER BORE SECOND END INCHES 0.625 |
| CWTB | COUNTERBORE NOMINAL DEPTH | COUNTER BORE SECOND END INCHES 0.052 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | COUNTER BORE SECOND END INCHES 1.250 |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0585 |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.223 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.176 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.375 |
| CWPZ | HELIX ANGLE | DEGREES 27.2667 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
Supersedes
This item replaces cancelled NIINs 003423731 · 003760407. An older drawing citing one of those numbers resolves here.