NSN 2920-00-936-8247 · NIIN 009368247 · FSC 2920
NO DASHES 2920009368247
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 0.710 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2500 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.380 |
| BZRR | THREAD SERIES | UNS |
| ABFF | FURNISHED ITEMS | LOCKWASHER AND NUT AND WOODRUFF KEY |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6684 AND INCHES MAXIMUM 0.669 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.375 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 25.0 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 0.766 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.669 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 6.118 AND INCHES MAXIMUM 6.131 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 6.998 AND INCHES MAXIMUM 7.011 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.323 AND INCHES MAXIMUM 0.333 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 1.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| ADER | MOUNTING STYLE | |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1100 |
| BCGN | GROUNDING METHOD | INTERNAL |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.190 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 163.0 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| CFHL | THREAD CLASS | 2A |
Supersedes
This item replaces cancelled NIINs 007931032 · 009006027. An older drawing citing one of those numbers resolves here.