NSN 3020-00-711-7003 · NIIN 007117003 · FSC 3020
NO DASHES 3020007117003
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.218 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.188 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AJLA | TEETH QUANTITY | 21 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 75.0 AND ROCKWELL B MAXIMUM 83.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.479 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.4375 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| ANTP | BORE STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 303S AND STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303S OR 303SE |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | 1 0.138 IN. DIA THREADED HOLE ON HUB FOR POSITIONING |
| CWTR | HUB STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIINs 008144263 · 009021586. An older drawing citing one of those numbers resolves here.