NSN 5306-01-021-6838 · NIIN 010216838 · FSC 5306
NO DASHES 5306010216838
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.443 AND INCHES MAXIMUM 0.493 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.858 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.313 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.438 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.059 AND INCHES MAXIMUM 0.079 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.055 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,-CDONNEL DOUGLAS COR |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 002882285. An older drawing citing one of those numbers resolves here.