NSN 5306-00-292-5478 · NIIN 002925478 · FSC 5306
NO DASHES 5306002925478
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.444 AND INCHES MAXIMUM 3.484 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.928 AND INCHES MAXIMUM 2.948 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.690 AND INCHES MAXIMUM 3.720 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.494 AND INCHES MAXIMUM 0.514 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.742 AND INCHES MAXIMUM 0.792 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.818 AND INCHES MAXIMUM 0.828 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.113 AND INCHES MAXIMUM 0.133 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4990 AND INCHES MAXIMUM 0.4995 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |