NSN 3040-01-486-4251 · NIIN 014864251 · FSC 3040
NO DASHES 3040014864251
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: LOS ANGELES CLASS SSN (688)
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.6300 |
| AGAV | END ITEM IDENTIFICATION | LOS ANGELES CLASS SSN (688) |
| AMDL | FIRST END DIAMETER | INCHES NOMINAL 1.1250 |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | INCHES NOMINAL 2.1400 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 0.9970 AND INCHES MAXIMUM 0.9980 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.2900 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.8339 AND INCHES MAXIMUM 0.8340 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.9980 |
| AMGS | SECOND END HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.4060 |
| ATPC | STEP QUANTITY | 5 |
| BDSR | SECOND END SPLINE QUANTITY | 10 |
| CSPY | LARGEST STEP DIAMETER | INCHES NOMINAL 1.500 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, HULL VALVE GAGGING |
| FEAT | SPECIAL FEATURES | FIRST END IS COUNTEREDBORED 0.125 INCH DIA. X 2.560 INCH DEEP. SHAFT HAS 0.125 INCH BORE DRILLED 2.530 INCHS ON SIDE CENTERLINE FROM FIRST END 0.500 INCH DEEP TO INTERSECT WITH END COUNTERBORE |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |