NSN 3020-00-274-6070 · NIIN 002746070 · FSC 3020
NO DASHES 3020002746070
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.750 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.625 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.750 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE 3135 |
| STYL | STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.3330 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.125 |
| MATT | MATERIAL | OVERALL STEEL COMP 3135 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.500 |
| AJLA | TEETH QUANTITY | 28 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.187 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.463 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.643 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.312 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AAQL | BODY STYLE |