NSN 9540-00-145-8450 · NIIN 001458450 · FSC 9540
NO DASHES 9540001458450
In Stock
ANGLE,STRUCTURAL
Structural Shapes, Nonferrous Base Metal
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARN | FABRICATION METHOD | EXTRUDED |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.500 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.500 |
| ABRY | LENGTH | FEET MINIMUM 10.000 AND FEET MAXIMUM 12.000 |
| ADXL | LEFT SIDE FLANGE THICKNESS | INCHES NOMINAL 0.094 |
| AGTA | BASIC SHAPE STYLE | |
| AJGL | FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | INCHES NOMINAL 0.188 |
| AJGP | BASE FLANGE THICKNESS | INCHES NOMINAL 0.094 |
| AJJB | FIRST TIP RADIUS | INCHES NOMINAL 0.094 |
| BRFD | WEIGHT PER UNIT MEASURE | POUNDS PER LINEAR FOOT 0.330 |
| CMZY | FIRST TIP STYLE | |
| CMZZ | SECOND TIP RADIUS | INCHES NOMINAL 0.094 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | ALLOY 7075 AND TEMPER T6 AND TEMPER T6511 |
| HEAT | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED OR T-6511 SOLUTION HEAT TREATED |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE A-S-Q-A-200 TO 11 |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | NOT IDENTICAL |
| CNQK | SECOND TIP STYLE | |
| CQHP | LEFT INSIDE ANGLE | DEGREES NOMINAL 90.0 |
Supersedes
This item replaces cancelled NIINs 014542339 · 005857207 · 010802733. An older drawing citing one of those numbers resolves here.