NSN 5962-01-150-3877 · NIIN 011503877 · FSC 5962
NO DASHES 5962011503877
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.760 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.248 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.135 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 27.5 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQZP | INPUT CIRCUIT PATTERN | 3 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | MULTIPLIER, ANALOG 1 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 40.0 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 500.00 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 81755-C8982 |
| TTQY | TERMINAL TYPE AND QUANTITY | PRINTED CIRCUIT 16 |
Supersedes
This item replaces cancelled NIINs 010407027 · 011558833. An older drawing citing one of those numbers resolves here.