NSN 5320-01-607-1959 · NIIN 016071959 · FSC 5320
NO DASHES 5320016071959
In Stock
PIN-RIVET
Rivets
Application: 1520-01-457-5179
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAPC | IDENTIFICATION CODE COLOR | RED |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.81 AND INCHES MAXIMUM 0.83 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.104 AND INCHES MAXIMUM 0.119 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2021 AND INCHES MAXIMUM 0.2026 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.315 |
| ABAA | COLLAR OUTSIDE DIAMETER | INCHES MINIMUM 0.318 AND INCHES MAXIMUM 0.322 |
| ABAB | COLLAR OVERALL HEIGHT | INCHES MINIMUM 0.437 AND INCHES MAXIMUM 0.457 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| ABCJ | COLLAR INSIDE DIAMETER | INCHES MINIMUM 0.208 AND INCHES MAXIMUM 0.212 |
| AGAV | END ITEM IDENTIFICATION | 1520-01-457-5179 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| MATT | MATERIAL | BOLT TITANIUM ALLOY |
| MATT | MATERIAL | COLLAR ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BOLT NATIONAL SPEC SINGLE MATERIAL RESPONSE 6AL-4V TITANIU- ALLOY ER A-S4928 OR A-S4967 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | COLLAR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-430 OR AA-A-225 TO 6 |
| SFTT | SURFACE TREATMENT | COLLAR ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | COLLAR MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CWBJ | COLLAR STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PROTRUDING SHEAR HEAD TITANIUM 1/16 GRIP VARIATION-1/64 OVERSIZE HI-LOK |
| HEAT | HEAT TREATMENT | COLLAR T-6 SOLUTION HEAT TREATED |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 90.0 |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 6130 |
| CQJX | NOMINAL THREAD SIZE | INCHES 10.0 |