NSN 5320-01-607-1789 · NIIN 016071789 · FSC 5320
NO DASHES 5320016071789
In Stock
PIN-RIVET
Rivets
Application: 1520-01-457-5179
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.387 AND INCHES MAXIMUM 0.412 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2646 AND INCHES MAXIMUM 0.2651 |
| AAZF | SHANK STYLE | |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.059 AND INCHES MAXIMUM 0.069 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.142 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPC | IDENTIFICATION CODE COLOR | RED |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.885 AND INCHES MAXIMUM 0.905 |
| ABAA | COLLAR OUTSIDE DIAMETER | INCHES MINIMUM 0.418 AND INCHES MAXIMUM 0.422 |
| ABAB | COLLAR OVERALL HEIGHT | INCHES MINIMUM 0.532 AND INCHES MAXIMUM 0.552 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| ABCJ | COLLAR INSIDE DIAMETER | INCHES MINIMUM 0.268 AND INCHES MAXIMUM 0.272 |
| AGAV | END ITEM IDENTIFICATION | 1520-01-457-5179 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.0947 AND INCHES MAXIMUM 0.0967 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.25 |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 10490 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 90.0 |
| CWBJ | COLLAR STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PROTRUDING SHEAR HEAD TITANIUM 1/16 GRIP VARIATION-1/64 OVERSIZE HI-L |
| HEAT | HEAT TREATMENT | COLLAR T-6 SOLUTION HEAT TREATED |
| MATT | MATERIAL | BOLT TITANIUM ALLOY |
| MATT | MATERIAL | COLLAR ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BOLT NATIONAL SPEC SINGLE MATERIAL RESPONSE 6AL-4V TITANIU- ALLOY ER A-S4928 OR A-S4967 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | COLLAR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-430 OR QQ-A-225 TO 6 |
| SFTT | SURFACE TREATMENT | COLLAR ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | COLLAR MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| AAJD | THREAD CLASS | 3B |