NSN 5320-01-415-5374 · NIIN 014155374 · FSC 5320
NO DASHES 5320014155374
In Stock
PIN-RIVET
Rivets
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.910 AND INCHES MAXIMUM 1.930 |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1582 AND INCHES MAXIMUM 0.1617 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3891 AND INCHES MAXIMUM 0.3901 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.7556 AND INCHES MAXIMUM 0.7604 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.370 AND INCHES MAXIMUM 1.380 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 14000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 22700 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE CAGEC 73197, SEC 294 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |