NSN 5307-01-187-8795 · NIIN 011878795 · FSC 5307
NO DASHES 5307011878795
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | NUT THREAD INCHES NOMINAL 0.325 |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 0.325 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.313 AND INCHES MAXIMUM 1.375 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.190 |
| CSJZ | STUD END SHANK LENGTH | INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.380 |
| CSXH | STUD END SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| FEAT | SPECIAL FEATURES | INTERNAL HEX DRIVE IN NUT END |
| MATT | MATERIAL | TITANIUM ALLOY UNS R56400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |