NSN 5307-01-248-2230 · NIIN 012482230 · FSC 5307
NO DASHES 5307012482230
In Stock
STUD,SHOULDERED
Studs
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| AASA | THREAD LENGTH | STUD THREAD INCHES NOMINAL 0.325 |
| AASA | THREAD LENGTH | NUT THREAD INCHES NOMINAL 0.325 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.977 |
| ADDB | NUT END SHANK LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.190 |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.190 |
| CSJZ | STUD END SHANK LENGTH | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.077 |
| CSXH | STUD END SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| CTDT | NUT END SHANK DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| FEAT | SPECIAL FEATURES | HEX POINT DRIVE IN NUT END 0.104 IN. MIN 0.119 IN. MAX DIA |
| MATT | MATERIAL | STEEL COMP 301 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 1 CL 2 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 73197-HL162B-6-4-1 |
Supersedes
This item replaces cancelled NIIN 012786548. An older drawing citing one of those numbers resolves here.