NSN 5320-00-103-3073 · NIIN 001033073 · FSC 5320
NO DASHES 5320001033073
In Stock
PIN-RIVET
Rivets
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.003 AND INCHES MAXIMUM 1.023 |
| AASK | HEAD STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.079 AND INCHES MAXIMUM 0.081 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.190 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.377 AND INCHES MAXIMUM 0.381 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MAXIMUM 0.693 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 007801237. An older drawing citing one of those numbers resolves here.