NSN 5320-01-515-1909 · NIIN 015151909 · FSC 5320
NO DASHES 5320015151909
In Stock
PIN-RIVET
Rivets
Application: A-10
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.563 AND INCHES MAXIMUM 2.583 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.160 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.233 AND INCHES MAXIMUM 0.253 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.4672 AND INCHES MAXIMUM 0.4682 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.650 |
| AGAV | END ITEM IDENTIFICATION | A-10 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.933 AND INCHES MAXIMUM 1.943 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.4375 |
| CQSX | SHEAR STRENGTH | DOUBLE POUNDS PER SQUARE INCH 32700 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HY-LOK |
| FEAT | SPECIAL FEATURES | NON-LUBED PINS MUST BE USED WITH WET SEALANT OR LUBED COLLARS |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 OR STEEL COMP 4140 OR STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S-S-6049 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6349 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6382 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 6415 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--416,TYE II,CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |