NSN 5320-01-698-8977 · NIIN 016988977 · FSC 5320
NO DASHES 5320016988977
In Stock
PIN-RIVET
Rivets
Application: B1-BACFT
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | B1-BACFT |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.160 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.2455 AND INCHES MAXIMUM 1.2550 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.4375 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 90.0 AND DEGREES MAXIMUM 100.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PROTRUDING TENSION HEAD PH13-8MO STAINLESS STEEL 1/16 GRIP VARIATION, 1/64" OVERSIZE |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629,H13-8-O |
| AAZF | SHANK STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.875 AND INCHES MAXIMUM 1.895 |
| AASK | HEAD STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE HI-SHEAR SEC 262 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1895 AND INCHES MAXIMUM 0.1930 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.4516 AND INCHES MAXIMUM 0.4526 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.641 AND INCHES MAXIMUM 0.676 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 20 |