NSN 5320-01-729-3353 · NIIN 017293353 · FSC 5320
NO DASHES 5320017293353
In Stock
PIN-RIVET
Rivets
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1895 AND INCHES MAXIMUM 0.1930 |
| AAZF | SHANK STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.0944 AND INCHES MAXIMUM 0.0969 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 95000 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE HI-SHEAR SEC 294 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.4375 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.6932 AND INCHES MAXIMUM 0.6992 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.4325 AND INCHES MAXIMUM 1.4475 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.1175 AND INCHES MAXIMUM 2.1375 |
| AASK | HEAD STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S4928 OR A-S 4967 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.4672 AND INCHES MAXIMUM 0.4682 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HI-LOK HI-TIGUE PIN 100 DEGREE FLUSH SHEAR HEAD TITANIUIM 1/16 GRIP |