NSN 5320-01-697-1390 · NIIN 016971390 · FSC 5320
NO DASHES 5320016971390
In Stock
PIN-RIVET
Rivets
Application: C-5
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.5625 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.1075 |
| ABAJ | LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, PROTRUDING TENSION HEAD, NICKEL BASE ALLOY (INCONEL 718) 1/16" GRIP VARIATION, 1/64" OVERSIZE |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE HI-SHEAR SEC.258 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AGAV | END ITEM IDENTIFICATION | C-5 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.475 AND INCHES MAXIMUM 0.505 |
| AAZF | SHANK STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.102 AND INCHES MAXIMUM 0.112 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3271 AND INCHES MAXIMUM 0.3276 |