NSN 5320-01-727-3794 · NIIN 017273794 · FSC 5320
NO DASHES 5320017273794
In Stock
PIN-RIVET
Rivets
Application: C-5
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.2016 AND INCHES MAXIMUM 0.2026 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| AAJD | THREAD CLASS | 3A |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 210000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 125000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HI-LOK HI-TIGUE PIN PROTRUDING TENSION HEAD NICKEL BASE ALLOY (INCONEL 718) 1/16 GRIP VARIATION, 1/64 OVERSIZE |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.6625 AND INCHES MAXIMUM 1.6825 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE HI-SHEAR SEC 258 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.3075 AND INCHES MAXIMUM 1.3175 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S 5662 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AGAV | END ITEM IDENTIFICATION | C-5 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CMLP | THREAD QUANTITY PER INCH | 32 |