NSN 5320-01-173-4819 · NIIN 011734819 · FSC 5320
NO DASHES 5320011734819
In Stock
PIN-RIVET
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.823 AND INCHES MAXIMUM 0.843 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.059 AND INCHES MAXIMUM 0.069 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0947 AND INCHES MAXIMUM 0.0967 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.387 AND INCHES MAXIMUM 0.412 |
| ABAJ | LUBRICATION | SOLID FILM OR CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 0.443 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 44.0 AND ROCKWELL C MAXIMUM 50.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 125000 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| FEAT | SPECIAL FEATURES | 6-32UNJC-3B THREADED CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE OF HEAD END 0.300 IN MIN,0.325 IN MAX DP,0.120 IN. SLOT LG,0.060 IN. SLOT W LOCATED 0.294 IN. FROM TOP OF HEAD TO BEGIN.OF SLOT |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |