NSN 5320-01-667-5799 · NIIN 016675799 · FSC 5320
NO DASHES 5320016675799
In Stock
PIN-RIVET
Rivets
Application: F/A-18 AIRCRAFT
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.7375 AND INCHES MAXIMUM 0.7575 |
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED SOLID FILM AND DRY FILM AND CETYL ALCOHOL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.2500 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET,THREADED,TENSION,100 DEGREE C'SUNK HEAD,HEX POINT DRIVE,0.0156 OVERSIZE,CRES (125 KSI FSU) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL SPEC SINGLE MATERIAL RESPONSE A-S5629 |
| AASK | HEAD STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL SPEC SINGLE TREATMENT RESPONSE A-S 2700,-ETHOD 1 OR 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-813 |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.0993 AND INCHES MAXIMUM 0.1013 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0947 AND INCHES MAXIMUM 0.0967 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.2646 AND INCHES MAXIMUM 0.2651 |
| AAZF | SHANK STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AGAV | END ITEM IDENTIFICATION | F/A-18 AIRCRAFT |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.477 |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.5018 AND INCHES MAXIMUM 0.5066 |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.3075 AND INCHES MAXIMUM 0.3175 |