NSN 5320-01-734-9374 · NIIN 017349374 · FSC 5320
NO DASHES 5320017349374
In Stock
PIN-RIVET
Rivets
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S5629 H13-8-O |
| ABAJ | LUBRICATION | OVERALL SOLID FILM AND DRY FILM AND CETYL ALCOHOL |
| FEAT | SPECIAL FEATURES | INTERNAL TAPPED HOLE SHALL BE 0.1380-32 UNJC-3B, EXCEPT PITCH DIAMETER SHALL BE 0.1204 -0.1177; DISTANCE FROM HEAD TO INJECTION PORT IS 0.47 INCHES |
| AAZG | HEAD MAJOR DIAMETER | OVERALL INCHES MINIMUM 0.597 AND INCHES MAXIMUM 0.604 |
| AAZE | SHANK DIAMETER | OVERALL INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAZF | SHANK STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE TREATMENT RESPONSE A-S2700, -ETHOD 1 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET, THREAD, TENSION, 100 DEGREES C'SUNK HEAD HEX POINT DRIVE, FOR SEALANT APPLICATION |
| AASU | HEAD HEIGHT | OVERALL INCHES MINIMUM 0.1330 AND INCHES MAXIMUM 0.1350 |
| ANEE | GRIP LENGTH | OVERALL INCHES MINIMUM 1.120 AND INCHES MAXIMUM 1.130 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 210000 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.3125 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | OVERALL INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.635 |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE |