NSN 5320-01-130-8454 · NIIN 011308454 · FSC 5320
NO DASHES 5320011308454
In Stock
PIN-RIVET
Rivets
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.760 AND INCHES MAXIMUM 0.780 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.059 AND INCHES MAXIMUM 0.069 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0947 AND INCHES MAXIMUM 0.0967 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.387 AND INCHES MAXIMUM 0.412 |
| ABAJ | LUBRICATION | SOLID FILM OR CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 0.380 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 125000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | (INAVY) PIN - RIVET, THREADED, SHEAR, PROTRUDING HEAD, HEX POINT DRIVE |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 003236083. An older drawing citing one of those numbers resolves here.