NSN 5305-01-179-0907 · NIIN 011790907 · FSC 5305
NO DASHES 5305011790907
In Stock
SCREW,MACHINE
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.451 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.561 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.315 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 |
| CYAY | BEARING SURFACE OF HEAD SURFACE TREATMENT | CADMIUM |
| CYAZ | HEAD SURFACE TREATMENT | CADMIUM |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBB | SHANK SURFACE TREATMENT | CADMIUM |
| CYBC | BEARING SURFACE OF HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2,EXCET BAKING REQUIRED AFTER LATING |
| CYBD | HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2,EXCET BAKING REQUIRED AFTER |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2,EXCET BAKING REQUIRED AFTER LATING |
| CYBF | SHANK SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2,EXCET BAKING REQUIRED AFTER LATING |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |