NSN 5320-01-715-7231 · NIIN 017157231 · FSC 5320
NO DASHES 5320017157231
In Stock
PIN-RIVET
Rivets
Application: DRIVES
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.6287 AND INCHES MAXIMUM 0.6335 |
| AAZU | TIP DIAMETER | INCHES NOMINAL 0.3125 |
| AAZF | SHANK STYLE | |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1295 |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.0575 AND INCHES MAXIMUM 1.0775 |
| AASK | HEAD STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE MATERIAL RESPONSE A-S4928 OR NATIONAL STD SINGLE MATERIAL RESPONSE A-S4967 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | 100 DEGREE FLUSH MS2469 TENSION HEAD TITANIUM |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.6825 AND INCHES MAXIMUM 0.6925 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| AGAV | END ITEM IDENTIFICATION | DRIVES |