NSN 5305-00-389-9349 · NIIN 003899349 · FSC 5305
NO DASHES 5305003899349
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: AIRCRAFT, HORNET F/A-18 (E/F);ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D);GUN SYSTEM, 25MM;AVIATION ORDANCE;AIRCRAFT, PHANTOM F-4;AIRCRAFT, EAGLE F-15;AIRCRAFT, HORNET F/A-18;AIRCRAFT, HARRIER AV-8B
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, HORNET F/A-18 (E/F);ENGINE, AIRCRAFT, F100-PW-100 (F-15A/B/C/D);GUN SYSTEM, 25MM;AVIATION ORDANCE;AIRCRAFT, PHANTOM F-4;AIRCRAFT, EAGLE F-15;AIRCRAFT, HORNET F/A-18;AIRCRAFT, HARRIER AV-8B |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 FSC- 76301 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.431 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.296 AND INCHES MAXIMUM 0.301 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.703 AND INCHES MAXIMUM 0.733 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
Supersedes
This item replaces cancelled NIIN 010735060. An older drawing citing one of those numbers resolves here.