NSN 5305-01-591-0080 · NIIN 015910080 · FSC 5305
NO DASHES 5305015910080
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.848 AND INCHES MAXIMUM 0.925 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.563 AND INCHES MAXIMUM 1.593 |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.953 |
| AAJD | THREAD CLASS | 3A |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE, 100 DEG COUNTERSUNK, REDUCED HEAD, HI-TORQUE, NON-MAGNETIC CRES (125 KSI FSU) |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AASU | HEAD HEIGHT | INCHES MAXIMUM 0.026 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.624 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.068 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2700 |