NSN 5305-00-310-6414 · NIIN 003106414 · FSC 5305
NO DASHES 5305003106414
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.438 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.662 AND INCHES MAXIMUM 0.668 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.631 AND INCHES MAXIMUM 0.681 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.266 AND INCHES MAXIMUM 1.296 |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S4967 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| ABQZ | INTERNAL DRIVE STYLE | |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |