NSN 5305-01-198-2448 · NIIN 011982448 · FSC 5305
NO DASHES 5305011982448
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: HARRIER
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.506 AND INCHES MAXIMUM 0.556 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.016 AND INCHES MAXIMUM 1.046 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | HARRIER |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.250 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |