NSN 5305-01-196-0448 · NIIN 011960448 · FSC 5305
NO DASHES 5305011960448
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.444 AND INCHES MAXIMUM 0.494 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.829 AND INCHES MAXIMUM 0.859 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| FEAT | SPECIAL FEATURES | TAPPED HOLE IN HEAD 0.1380-32,UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.150 INCH. INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 4967,CO- 6AL-4V |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |