NSN 4720-00-916-9226 · NIIN 009169226 · FSC 4720
NO DASHES 4720009169226
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND NUTS DRILLED FOR LOCKWIRE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.438 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 5.625 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07482-J263 |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 0.343 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| ADJS | EXTERIOR COLOR | NATURAL |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.173 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
Supersedes
This item replaces cancelled NIIN 008588941. An older drawing citing one of those numbers resolves here.