NSN 4720-00-916-9240 · NIIN 009169240 · FSC 4720
NO DASHES 4720009169240
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 7.000 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 07482--50T8 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| ADJS | EXTERIOR COLOR | NATURAL |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.188 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.312 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.438 |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND NUTS DRILLED FOR LOCKWIRE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
Supersedes
This item replaces cancelled NIIN 007259169. An older drawing citing one of those numbers resolves here.