NSN 4720-00-917-4012 · NIIN 009174012 · FSC 4720
NO DASHES 4720009174012
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.391 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.625 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 8.500 |
| FEAT | SPECIAL FEATURES | EA END CONNECTION NUT HAS 2 SAFETYWIRE HOLES |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07482-J264 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 0.585 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.750 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
Supersedes
This item replaces cancelled NIIN 008464084. An older drawing citing one of those numbers resolves here.