NSN 4720-00-928-4844 · NIIN 009284844 · FSC 4720
NO DASHES 4720009284844
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHNC | CONNECTION STYLE | |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.312 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND NUTS DRILLED FOR LOCKWIRE |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.188 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SOURCE CONTROL 07482-J266B0074A105B |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 7000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 7.500 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07482-J266 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 105.0 |
| AAJD | THREAD CLASS | 3B |
| ADJS | EXTERIOR COLOR | NATURAL |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.438 |
Supersedes
This item replaces cancelled NIIN 007279624. An older drawing citing one of those numbers resolves here.