NSN 6105-00-643-3709 · NIIN 006433709 · FSC 6105
NO DASHES 6105006433709
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXGY | MOUNTING METHOD | FACE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | REPULSION-INDUCTION |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A5 EXCEPT ADDITIONAL FLAT LOCATED AT 90 DEGREES |
| AAJT | OVERALL HEIGHT | INCHES 3.312 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 1.1880 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0310 |
| AAJU | OVERALL LENGTH | INCHES 5.375 |
| AAJV | OVERALL WIDTH | INCHES 3.312 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.625 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 AND AMBIENT CELSIUS 35.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 2.625 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3450.0 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.281 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
Supersedes
This item replaces cancelled NIIN 005083326. An older drawing citing one of those numbers resolves here.